スポンサーサイト

上記の広告は1ヶ月以上更新のないブログに表示されています。
新しい記事を書く事で広告が消せます。
総合案内当ブログについて
Windowsの目次Linuxの目次Linuxの目次2・ ・自作PC関連の目次Web技術関連の目次
全記事一覧情報サイト新着RSS一覧

Sponsored Link

lm-sensor追加まではできたものの・・・

8.10のほうでパネル監視とConky設定を引き継ぐのに四苦八苦。
とりあえずlm-sensorsまではOK

$ apt-get install lm-sensors
質問にはyかenter
再起動

~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0°C (crit = +75.0°C)

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +41.0°C
Core0 Temp: +30.0°C
Core1 Temp: +35.0°C
Core1 Temp: +26.0°C

it8716-isa-0228
Adapter: ISA adapter
VCore: +1.12 V (min = +0.00 V, max = +4.08 V)
VDDR: +3.36 V (min = +0.00 V, max = +4.08 V)
+3.3V: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
+5V: +4.97 V (min = +0.00 V, max = +6.85 V)
+12V: +11.97 V (min = +0.00 V, max = +16.32 V)
in5: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
5VSB: +4.84 V (min = +0.00 V, max = +6.85 V)
VBat: +3.22 V
fan1: 1650 RPM (min = 3245 RPM)
fan2: 0 RPM (min = 3245 RPM)
fan4: 2295 RPM (min = 0 RPM)
temp1: +34.0°C (low = -1.0°C, high = +127.0°C) sensor = thermal diode
temp2: +43.0°C (low = -1.0°C, high = +127.0°C) sensor = transistor
temp3: +25.0°C (low = -1.0°C, high = +127.0°C) sensor = transistor
cpu0_vid: +1.550 V

監視はできてるみたい。
パネルに追加が出てこない。。。
そしてConkyも読み込みエラー。。。うーむ。。。

カーネルモジュール組み込みが必要?ということで
tmin@tmin-desktop:~$ sudo sensors-detect
[sudo] password for tmin:
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Use driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600 SMBus

We will now try to load each adapter module in turn.
Module `i2c-piix4' already loaded.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): y
Module loaded successfully.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... Yes
Found `ITE IT8716F Super IO Sensors' Success!
(address 0x228, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No

Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... Success!
(driver `k8temp')
AMD K10 thermal sensors... No
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `it87' (should be inserted):
Detects correctly:
* ISA bus, address 0x228
Chip `ITE IT8716F Super IO Sensors' (confidence: 9)

Driver `k8temp' (should be inserted):
Detects correctly:
* Chip `AMD K8 thermal sensors' (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue:

To load everything that is needed, add this to /etc/modules:

#----cut here----
# Chip drivers
it87
k8temp
#----cut here----

Do you want to add these lines automatically? (yes/NO)y

まだだめだな。端末内で見ると監視はできてるけど表示されない。
多分明日再挑戦。

続きです。8.10にConky導入時Conkyrcに不具合発覚
8.10でconky起動こちらで修正版&Conky導入まとめです。すみませんm(. .m
関連記事
総合案内当ブログについて
Windowsの目次Linuxの目次Linuxの目次2・ ・自作PC関連の目次Web技術関連の目次
全記事一覧情報サイト新着RSS一覧

Sponsored Link

コメントの投稿

管理者にだけ表示を許可する
ブログ内検索

カスタム検索

フリーエリア

クリックで救える命がある。

レンタルサーバー

さくらのマネージドサーバ
さくらインターネットのVPS
ConoHaのVPS
WebARENA VPSクラウド
99円レンタルサーバー
【CloudCore VPS】
GMOクラウドのレンタルサーバー
転送量無制限 ABLENET
@WAPPYレンタルサーバー
SPPDレンタルサーバー

カテゴリー+月別アーカイブ

 

アクセスカウンター

現在の閲覧者数:

プロフィール

Author:tmin
PCヲタ。ライト2ちゃんねら。
スロット好きのギャンブラー。(元
むしろ人生がギャンブルだが目下のところ負けっぱなし。
座右の銘は「結果オーライ」。故に基本適当。
トラブルもまた楽しみのひとつ

コメント、トラバ、相互リンク歓迎。お気軽にどうぞ。
当ブログについて
Twitterでこっちとあっちの更新情報流すことにしてみます。
http://twitter.com/t_min
Project Mikunchu♪Wikiできました。
Mikunchu200x40.png


上記広告は1ヶ月以上更新のないブログに表示されています。新しい記事を書くことで広告を消せます。